Remote control robot for water rescue
Water rescue remote control robots are widely used in marine ship overturning accidents, flood disasters, rivers, torrential waters and other people falling into the water to rescue; it can be remotely controlled on shore, understand the ship’s position and usage parameters through the Internet, and solve the limits of traditional rescue equipment, for example: the range of the projectile is short, the lifebuoy is inaccurate, the flying distance is shortened after the weight of the drone, and the inflatable time of the rubber boat is long etc. The remote control robot for water rescue is light and can be cast from shore, ship, airplane, and bridge. Even if falling into the water, it can be adjusted back to the front automatically and quickly. It has the characteristics of resisting wind and waves. The complex waters such as rapids or strong wind and waves increase the difficulty of rescue by lifeguards. The robot is stable in rapids or wind and waves at a speed of 12m/S. Traveling to reach the person who fell into the water, it can replace the lifeguard to carry life jackets, life buoys, rescue ropes and other materials to the person who fell into the water; there are 4 handles on both sides of the robot‘s fuselage, and there are 6 pull ropes in the lower part of the fuselage, which can accommodate 4-6 falling into the water. Grab it or lie down on the fuselage and wait for rescue; use jet safety drive, non-propeller rotation, to avoid the propeller from causing secondary damage to the water; at the same time, it can provide a unique remote control design.
Features: Anti-wind and wave, can move forward steadily in rapids or wind and waves, can rescue multiple people at the same time, light and fast, two robots can be connected side by side and used together remotely
Product structure: The structure of the water rescue remote control robot is upper and lower structures, the upper part is made of anti-collision soft buoyancy material, and the lower hull is made of rotation molding material, which is wear-resistant and impact-resistant, non-inflatable structure, and there is no danger of air leakage.
Launching method: The remote-controlled water rescue robot can be thrown from a boat, ashore, or a plane, and it can automatically and quickly adjust back to the front even if it rolls over in the water.
Technical parameter:
1 Waterproof grade： IP67
2 Water speed (km/h)： 43 km/h
3 Remote control distance (m)： 3500 meters
4 Manned buoyancy (kg)： 300 kg
5 Water towing weight (kg)： 300 kg
6 Turn up and down righting time (seconds) : 2 seconds
7 Drive power: lithium iron phosphate battery 1 piece
8 Battery continuous working time (minutes): 45 minutes or more
9 Battery fast charging time (minutes): ≤1 hour
10 Driving device: The jet is driven safely, not by propeller rotation.
11 Anti-wind and wave rating (m): 2m
12 Weight without battery (kg): 15 kg
13 Robot size: 135 *41*34cm
14 The pulling force of the robot supporting floating rope: more than 360kg
15 Online use features: Two robots can be used side by side online and remotely used together
16 Test report: with the test report of CCS, China Ship Life-saving Equipment Quality Inspection and Testing Center
For details, please consult:
Shenzhen Zhongwang Intelligent Technology Co., Ltd.
Miss Chen: 15362885968 (same number on WeChat)
